Services: CNC turning and milling
We machine parts to customer drawings: from prototype to series. Our speciality: difficult materials, tight tolerances, special threads.
What we offer
We turn and mill precision parts to customer drawings – from single prototypes to production series. We machine practically all machinable materials, including Inconel and other nickel alloys, titanium alloys, stainless steels (e.g. 316 / 1.4401), heat-resistant steels, structural and tool steels, aluminium, brass and bronze, and engineering plastics.
Material certificates: on request we supply mill certificates from our material suppliers – please mention it when ordering.
CNC turning
Turning on 2 CNC lathes and 2 CNC bar-feed lathes: single pieces, short and long runs.
- Doosan Lynx 300M – C-axis and live tooling: diameter up to Ø300 mm, length up to 700 mm. Turning and milling (holes, flats, slots) in one clamping.
- Maho Graziano GR200: diameter up to Ø160 mm, length up to 300 mm.
- 2 CNC bar-feed lathes: bar up to Ø20 mm, part length up to 200 mm. Small precision parts in series.
CNC milling
3-axis milling on a Bridgeport VMC 800 machining centre, working area 800 × 500 × 500 mm (X × Y × Z): faces, pockets, holes, threads. Milling complements turning, so most parts are made entirely in-house.
Special threads
Aerospace MJ threads and other special threads, also in Inconel and titanium. Checked with thread gauges and micrometers.
Who we work for
Aerospace subcontractors, manufacturers of veterinary implants and instruments, companies in the defence, agricultural and technology sectors, machine builders and private customers. We produce both single prototypes and production series.
Inspection and measurement
Micrometers, calipers, thread gauges and a profile projector with micron accuracy. Critical dimensions are checked on every part – also in large batches. Tolerances down to 8 µm (0.008 mm).
Project examples
Inconel, aerospace: MJ95×1 thread in a thin wall
A batch of 10 Inconel parts for a customer in the French aerospace industry, with an MJ95×1 thread cut in a thin wall. Inconel distorts easily in thin sections – we developed a machining process that held size and geometry across the whole batch.
Stainless steel 316: 0.5 mm wall
A 316 (1.4401) stainless steel part with a 0.5 mm wall. After roughing, we removed the distorted material, re-clamped the part in a dedicated fixture, then finished the bore and faced the end to final size. Result: a part fully compliant with the drawing.